2-5 Battery Kit Assembly (option) NOTICE: Please assemble battery kit1 first before installing it inside of UPS. Please select correct battery kit procedure below to assemble it. 2-battery kit Step 1: Remove adhesive tapes. Tapes

Step 3: Communication connection Communication ports: USB port1 RS-232 port2 Intelligent slot To allow for unattended UPS shutdown/start-up and status monitoring, connect the communication cable one end to the USB/RS-232 port and the other to

Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. Please keep the original package in a safe place for future use. 2-1. Rear Panel View 800/1.1K/1.5K IEC Type 2.5K/3K

Maintenance, Service And Faults l The UPS system operates with hazardous voltages. Repairs may be carried out only by qualified maintenance personnel. l Caution – risk of electric shock1. Even after the unit is disconnected

Please comply with all warnings and operating instructions in this manual strictly. Save this manual properly and read carefully the following instructions before installing the unit. Do not operate this unit before reading through all