2-5 Battery Kit Assembly (option) NOTICE: Please assemble battery kit1 first before installing it inside of UPS. Please select correct battery kit procedure below to assemble it. 2-battery kit Step 1: Remove adhesive tapes. Tapes

Step 3: Communication connection Communication ports: USB port1 RS-232 port2 Intelligent slot To allow for unattended UPS shutdown/start-up and status monitoring, connect the communication cable one end to the USB/RS-232 port and the other to

Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. Please keep the original package in a safe place for future use. 2-1. Rear Panel View 800/1.1K/1.5K IEC Type 2.5K/3K

Maintenance, Service And Faults l The UPS system operates with hazardous voltages. Repairs may be carried out only by qualified maintenance personnel. l Caution – risk of electric shock1. Even after the unit is disconnected

Please comply with all warnings and operating instructions in this manual strictly. Save this manual properly and read carefully the following instructions before installing the unit. Do not operate this unit before reading through all

Karachi businesses lose $4.8 million daily during power outages. The right UPS makes all the difference. Key Features for Pakistan: 8-10 hour minimum backup Wide voltage input (160-280V) High-temperature tolerance Surge protection Pakistan Power Solution

Power fluctuations cost Cairo retailers 37% annual revenue – generic UPS units fail when needed most. Commercial-grade UPS systems must withstand Egyptian voltage swings (160V-260V), provide 10ms transfer time, and offer true sine wave output

Power outages cost US homeowners $150 billion annually – the right lithium battery storage can prevent your share of losses. The best home energy storage lithium batteries balance capacity (10-30kWh), power output (5-10kW continuous), and

Power outages cost households hundreds annually – the right backup power prevents losses efficiently. Select home backup power based on: 1) Essential load watts calculation (+20% buffer), 2) Duration needs (4-hour vs 24-hour runtime), 3)

2.2 Serial Data Communication The UPS provides an RJ45 RS485 interface based on the ModBUS protocol. It sends protocol commands to the battery pack to obtain detailed operational status, SOC, SOH, and other critical parameter