Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. Please keep the original package in a safe place for future use.
2-1. Rear Panel View
800/1.1K/1.5K IEC Type

2.5K/3K IEC Type

2K NEMA Type

800/1.1K/1.5K Schuko Type

2.5K/3K Schuko Type

2K IEC Type

Otima ll-800RT120
800/1.1K/1.5K NEMA Type

2.5K/3K NEMA Type

2K Schuko Type

1. Programmable outlets¹: connect to non-critical loads.
2. Output receptacles: connect to mission-critical loads.
3. AC input
4. Input circuit breaker
5. Network/Fax/Modem surge protection
6. Emergency power off function connector (EPO)²
7. USB communication port
8. RS-232 communication port
9. SNMP intelligent slot
10. External battery connector (only available for L model)
    2-2. Install The UPS
    For safety consideration, the UPS is shipped out from factory without connecting battery wires. Before install the UPS, please follow below steps to re-connect battery wires first.